I have installed new laminate flooring in my kitchen. It has been finished off with 1/4 round molding. But, I have not yet figured out how to finish the molding as it touches the end cap? or finish piece at the entry-way. It is a transition from the flooring to carpet.

I have a photo of the area I would like to post that shows the problem clearly. How do I do post it?

Thanks, Jack

quote:

touches the end cap? or finish piece at the entry-way. It is a transition from the flooring to carpet.

Does these pic help? The carpet is on a tack-strip and tucked down at the laminate/floor transition.

quote:

Posted 01 July 2005 08:42 AM

quote:
touches the end cap? or finish piece at the entry-way. It is a transition from the flooring to carpet.



Does these pic help? The carpet is on a tack-strip and tucked down at the laminate/floor transition.

Thank you, but my problem/opportunity here is how to finish off the end of the 1/4 round that touches my already installed end cap/transition piece. I really think I have to post the photo of the problem, but can't post it.

Jack

OK, here's a url to the photo of my kitchen molding problem. I need to cut a piece of 1/4 round to finish off the job. Any ideas, please?

http://www.geocities.com/jkamer39/kitchen1.jpg

Thanks, Jack

Continue your quarter round up to the carpet. End it with a 45 degree back-slant cut (toe end at carpet edge)- (I hope you understand what I'm talking about.) I can't tell how high your end cap is, hopefully, the quarter round will just go across it, because you need something to finish it off and the carpet.

Thanks, I think I've got it! And yes, the 1/4 round will fit up over the cap.

Jack