|
|
If the kitchen sink drain location is only off by three or four feet and that puts in the middle of a doorway to the living room, then there's something very wrong with your kitchen layout. As long as you have to move the pipe, I'd suggest getting a decent kitchen layout and move it to the right place.
Architect (NY) and Home Designer (PA)
|
| |
| Posts: 2572 | Location: Tobyhanna, PA | Registered: 24 October 2005 |    |
|
|
|
quote: Originally posted by Richard Hetzel: If the kitchen sink drain location is only off by three or four feet and that puts in the middle of a doorway to the living room, then there's something very wrong with your kitchen layout. As long as you have to move the pipe, I'd suggest getting a decent kitchen layout and move it to the right place.
I agree, but there isn't anything wrong with the layout. We really like the layout, they just put the drain pipe in the wrong place.
|
| |
| Posts: 4 | Location: Houston, TX | Registered: 24 November 2007 |    |
|
|
|
quote: Originally posted by Richard Hetzel: If the kitchen sink drain location is only off by three or four feet and that puts in the middle of a doorway to the living room, then there's something very wrong with your kitchen layout. As long as you have to move the pipe, I'd suggest getting a decent kitchen layout and move it to the right place.
Wait, I see what you're saying now. Okay, perhaps it's more like 6 feet off from where it should be (I've often been told I have no future as a golf caddie.) Anyway, point is that if the thing can be put back to where it needs to be w/o harming the integrity of the slab, I'm okay with it. Otherwise, I have big problems.
|
| |
| Posts: 4 | Location: Houston, TX | Registered: 24 November 2007 |    |
|
|
|
Floor slabs are cut and patched all the time. I think a good concrete contractor would know exactly how to do it.
Architect (NY) and Home Designer (PA)
|
| |
| Posts: 2572 | Location: Tobyhanna, PA | Registered: 24 October 2005 |    |
|
|
|
quote: Originally posted by Richard Hetzel: Floor slabs are cut and patched all the time. I think a good concrete contractor would know exactly how to do it.
Thank you! That is just the assurance I was looking for from a disinterested 3rd party! Have a Merry Christmas, sir!
|
| |
| Posts: 4 | Location: Houston, TX | Registered: 24 November 2007 |    |
|
|
|
All the above is correct, unless you have radiant floor heat, that's a whole new ballgame then.
General Contractor/Home Builder
|
| |
| Posts: 319 | Location: Minnesota | Registered: 15 January 2007 |    |
|