|  Newsletter
Blogs  |  ProTV  |  Message Boards  |  Sweepstakes  |  Best of HGTVPro
HGTVPro.com
Newsletter Signup
Subscribe to HGTVProFile for
timely information on new
products, best practices,
professional advice and more.

Subscribe Now!
Sponsored Content





Message Boards
    boards.hgtvpro.com    HGTVPro Message Boards  Hop To Forum Categories  Best Practices  Hop To Forums  Framing    Rain and mud during framing
Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
Posted
Having a big builder build our house. Rained heavily during framing, now lots of mud on lumber and wood. Builder says ok since now its dry.

Should I be concerned?

Ravi
 
Posts: 7 | Registered: 13 May 2009Reply With QuoteEdit or Delete MessageReport This Post
Picture of LA Marlowe
Posted Hide Post
Without seeing the wood, this kind of thing happens a lot more than people know. The moisture is more of a big deal than the mud, and as long as the wood dries thoroughly without twisting or warping then it will be fine.

It is very good that you notice things and question the builder about anything that concerns you. Keep good notes of your conversations with him, with dates and times, just in case something does come up later.

Congratulations on your new home. If they are just now framing then you have just started on what will be a long, tedious, and stressful process. The more involvement you have with every step along the way the happier you'll be with the end result.

Best of luck!
 
Posts: 261 | Location: VA, AL, GA | Registered: 23 October 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
This happens a lot during construction. AS long as the lumber is dry before they close up the interior you should be fine. If the wood is still wet when they close up the walls you will get some mold.
 
Posts: 1438 | Location: New Jersey | Registered: 31 January 2006Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
I agree, it's not a big deal as long as it dries before they enclose it. After all the wood is extremely moist when it is cut. Getting wet once or twice isn't a big deal. It's when it's continually subjected to moist/dry cycles that rot becomes an issue. Even continually submerged in water isn't an issue (even for non-treated lumber), it's the getting wet and drying (many times) that is the issue.


Structural Engineer
 
Posts: 58 | Location: Philadelphia, PA | Registered: 20 July 2008Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
the wood is dry and the mud has been scraped off so I guess its ok.
 
Posts: 7 | Registered: 13 May 2009Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community  
 

    boards.hgtvpro.com    HGTVPro Message Boards  Hop To Forum Categories  Best Practices  Hop To Forums  Framing    Rain and mud during framing