|  Newsletter
Blogs  |  ProTV  |  Message Boards  |  Sweepstakes  |  Best of HGTVPro
HGTVPro.com
Newsletter Signup
Subscribe to HGTVProFile for
timely information on new
products, best practices,
professional advice and more.

Subscribe Now!
Sponsored Content





Message Boards
Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
Posted
Our cedar siding hasn't been painted in several years and it's time to paint but we are not sure how to prep it prior to painting. Can anyone help with this question and would someone know what type of paint would be best for this siding. Any help would be greatly appreciated.
 
Posts: 1 | Registered: 06 September 2006Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Painting cedar can be an iffy proposition, because it sometimes repels paint. If it's already painted, do you know what paint was used? If so, I'd use it again.

Preparation as usual...wash thoroughly, perhaps with a power washer, remove any loose or peeling paint, sand the edges where paint is removed to feather them, apply primer to any bare wood (this is the tricky part; using the correct primer for cedar) and then paint.


Architect (NY) and Home Designer (PA)
 
Posts: 2509 | Location: Tobyhanna, PA | Registered: 24 October 2005Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
You state, "apply primer to any bare wood (this is the tricky part; using the correct primer for cedar) and then paint." Can you clarify the what to look for specifically in a primer or barrier for the cedar? Or, what to be stay clear of? Thanks!

quote:
Originally posted by Richard Hetzel:
Painting cedar can be an iffy proposition, because it sometimes repels paint. If it's already painted, do you know what paint was used? If so, I'd use it again.

Preparation as usual...wash thoroughly, perhaps with a power washer, remove any loose or peeling paint, sand the edges where paint is removed to feather them, apply primer to any bare wood (this is the tricky part; using the correct primer for cedar) and then paint.
 
Posts: 1 | Registered: 12 September 2006Reply With QuoteEdit or Delete MessageReport This Post
Dan
Posted Hide Post
Cedar is known to bleed, so if a primer does not completely seal the surface it will allow the cedar to bleed through and will show in the finish paint. Oil based primers and finsh coat that are designed for exterior wood surfaces. I would go to a professional paint store they can reccomend the correct primer and top coat that is best for your situtation. You will pay more, but it will be money well spent.
 
Posts: 36 | Registered: 15 June 2005Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
We used an oil based Kilz type primer to help block the bleeding from cedar. That was covered with a latex top coat as latex has more flexibility than oilbased paint for expansion of siding in our wide temperature extremes. All of this was in a repainting project 2 years ago. It of course still looks brand new but it should at only 2 years.
 
Posts: 19 | Registered: 19 April 2006Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

    boards.hgtvpro.com    HGTVPro Message Boards  Hop To Forum Categories  Best Practices  Hop To Forums  Exterior Finishes    Painting cedar siding