|  Newsletter
Blogs  |  ProTV  |  Message Boards  |  Sweepstakes  |  Best of HGTVPro
HGTVPro.com
Newsletter Signup
Subscribe to HGTVProFile for
timely information on new
products, best practices,
professional advice and more.

Subscribe Now!
Sponsored Content





Message Boards

 
  boards.hgtvpro.com
  HGTVPro Message Boards
Hop To Forum Categories   Trades and Specialties
Hop To Forums   Roofing
  Venting air from house thru roof
Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
Posted
My son bought an old house in DC which has a flat tar roof. There is a very small space above the top floor which may be considered an attic. He would like to install a whole house fan which would draw hot summer air from the house thru the roof. The attic area is not accessable and does not appear to be vented presently. What could he use to remove the hot summer air? Could it also be used to vent the attic space? We thought maybe he could use a wind turbine but don't know if they could be used on a flat roof. Any ideas?
 
Posts: 1 | Registered: 25 March 2008Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
A mushroom-type fan can be mounted on a flat roof. Usually, it is mounted on a wood or prefabricated curb which is flashed with neoprene and mopped into the roof with tar, and the base of the fan is a counter-flashing with a drip edge. The fan capacity and speed should be selected by someone who is familiar with such fans and their noise properties. You don't want the fan howling up there. It can be controlled by a thermostatic switch in the attic if desired.


Architect (NY) and Home Designer (PA)
 
Posts: 2382 | Location: Tobyhanna, PA | Registered: 24 October 2005Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
There should have been side wall vents in this crawl attic space. You do not want to cut into the flat roof, unless you understand how to properly curb and flash it. Not to many folks do. Its a lot more then just cutting and framing a box then throwing a little tar on it.

You should consider a few things.
1. Paint the roof with aluminum roof coating. That will lower the temp a lot. It will also preserve the roof as well.
2. Cut into the side of the attic walls vents. One or two on each side if you can. That should be more then enough to do the trick

A lot of folks turn to power fans and vents to ventilate their attics, regardless of shape. What they do not realize is that it can cause other issues as a result.
Mold is a very common condition when a attic is power vented. These fans draw more humid air into the attic then what would have normally entered with natural ventilation. The end result is mold growth. Also with motorized fans you are using electrical current which is not needed with a natural ventilated attic that is properly insulated.
 
Posts: 862 | Location: New Jersey | Registered: 31 January 2006Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

    boards.hgtvpro.com    HGTVPro Message Boards  Hop To Forum Categories  Trades and Specialties  Hop To Forums  Roofing    Venting air from house thru roof