|
|
The squeak could be coming from the subfloor, or the laminate floor. I had a situation in the last house where the installer didn't put down the foam underlayment in part of the room because he ran out, and was too cheap or lazy to go get more. The floor moved about a 1/4" up and down, and that's alot.
Also, it's possible that the floor was put in "too tight" in that area, and it's creating undo friction. If the floor has had time to acclimate to the house environment, then part of the floor may need to be trimmed, if it's installed too tight.
I'm assuming this is a quick-lock floor, as opposed to a tongue and groove, glued floor. If its a glued seam floor, the installer may have missed gluing a joint or 2.
Hope this helps a little. good luck.
|
| |
|